Exciting news cssy latest upgrade laboratory smart all-in-one ultra pure water purification system SSY-UPH2.0 floor style
Process improvement project:
1.UPH Laboratory ultra pure water system upgrade
1.1 Optimized the box structure, the volume is reduced to 60% of the original, the layout is more reasonable, the structure is more compact, and the installation space is greatly saved.
1.2 The storage tank is upgraded to a stainless steel aseptic water tank with built-in immersed ultraviolet light and air breathing apparatus to effectively inhibit the growth of bacteria in the tank.
1.3 The purification system is upgraded from mixed bed to electric deion system, the effluent water quality is stable, automatic regeneration can be achieved, and the service life of consumables is extended without frequent replacement of consumables.
1.4 The purification system is designed for automatic cycle washing, which can effectively prevent the breeding of microorganisms in the system and improve the efficiency of ion exchange.
1.5 Add TOC remover and reduce TOC value of produced water.
1.6 The terminal adopts imported heat removal filter membrane, and the heat removal rate is as high as 99.5%.
The CSSY Laboratory Ultra Pure Water System produces pure and ultra pure water straight from tap water supply.The SSY-UPH2.0 can meet your laboratory testing of water demand with water supply stability.All-in-one design, small footprint, simple operation.
-
Model: SSY-UPH2.0-20L/40L/60LCapacity: 20/40/60L/HElectrical resistivity(25℃): 15-18.25 MΩ.cmOne-stage RO Conductivity: conductivity≈raw water conductivity×2%Two-stage RO Conductivity: ≤5µs/cmPower: 350WSize: 670(W)×530(D)×1270(H)mmAccording to standard:“YYT1244-2014”, “WS/T 574-2018”, “GB/T33087-2016”, “GB/T6682-2008”.Application: PCR,DNA sequencing,TOC detection,IC,HPLC,GC-MS,AA Gel analysis.Objective: To meet high-end water demand
Process Flow Diagram:
Raw water → Wire wound filter element → CTO Filter element → PP Filter element → One-Stage high pressure pump → One-Stage reverse osmosis membrane → Two-stage high pressure pump → Two-Stage reverse osmosis membrane → Sterile water tank → EDI system → Ultraviolet sterilizer → UF Ultrafiltration system → PES Terminal microfiltration → Water use point
Model: SSY-UPH2.0-20L/40L/60L
Capacity: 20/40/60L/H
Electrical resistivity(25℃): 15-18.25 MΩ.cm
One-stage RO Conductivity: conductivity≈raw water conductivity×2%
Two-stage RO Conductivity: ≤5µs/cm
Power: 350W
Welcome to inquiry from CSSY about the Two-Stage Reverse Osmosis with EDI Laboratory Ultra Pure Water System.