description2

SSY-EG Pure Water Treatment System

Product Introduction

The cleaning and disinfection center is the supply unit of various sterile items in the hospital, which is responsible for the cleaning, packaging, disinfection and supply of medical equipment. If the disinfection is not thorough, it will cause hospital-wide infection, so it is very important to do a good job of supply room disinfection, and it is also an indispensable part of hospital work.

Quality of water produced: Meet GB5749-2006 "Sanitary Standards for Drinking Water", TDS≤300ppm.

Application: Operating room instrument cleaning.

Technical Features

1. The pretreatment system adopts automatic control mode to automatically regenerate and rinse.

2. Equipped with various monitoring instruments, real-time online monitoring of pressure flow, water quality and other information.

3. Reverse osmosis system automatic positive and negative low pressure flushing function to avoid the formation of concentration polarization phenomenon, extend the service life of the film.

4. Independent electronic control system display panel, with automatic and manual, two working modes, real-time display of equipment operation of various status information.

5. Automatic water leakage detection sensor, water leakage in time to cut off water.

6. Complete historical data recording function, automatically save water quality data, support query and download.

7. Independent source water pressurization system to solve the fluctuation of tap water pressure and ensure the normal operation of equipment.

8. Constant pressure intelligent water supply mode, water supply pressure can be adjusted according to demand.

Model	Capacity	Power	Input Power	Overall Size
SSY-EG-200L	200L/H	2.2KW	AC220V/50HZ	11007301600mm
SSY-EG-250L	250L/H	2.2KW	AC220V/50HZ	11007301600mm
SSY-EG-300L	300L/H	2.2KW	AC220V/50HZ	11007301600mm
SSY-EG-500L	500L/H	2.5KW	AC220V/50HZ	11007301600mm

Technical Parameter

Model:	SSY-EG-200/250/300/500L/H
Capacity：	200/250/300/500L/H
Environment Temperature:	5-45℃
Raw Water Pressure:	0.2-0.4Mpa
Productive Water Quality Index:	one stage conductivity value:＜15μs/cm;two-stage conductivity value:≤5μs/cm@25℃ Bacterial Removal Rate≥99.6% Particle (>0.2μm) ＜1 piece/ml Ion Retention Rate:97%-99% Organic matter retention rate＞99% Meet WS 310.1.2.3-2016 Technical Specification for Cleaning and Disinfection of Hospital Disinfection Supply Center (Supply Room)
Application:	Operating room instrument cleaning

SSY-EG Process Flow Diagram

Raw water → Raw water tank → Raw water pump → Quartz sand tank → Activated carbon tank → Resin softening tank → Salt tank → Security filter → High pressure pump → Reverse osmosis membrane →Pure water tank → Delivery pump → Water point